Cartridge Silo Vent Filter
Compact cartridge silo vent filters for limited installation space and high filter density.
Product Overview
Cartridge Silo Vent Filter is used for dust collection and silo venting during powder storage, pneumatic conveying, truck unloading and bulk material handling. Dust is captured by filter bags or cartridges, and clean air is discharged through the top or outlet while collected dust falls back into the silo or hopper after pulse jet cleaning.
We supply standard model equipment and custom-built dust collectors according to airflow, filter area, material characteristics, silo size and installation conditions.
| Item | Typical Range / Options |
|---|---|
| Airflow | 270-10800 m3/h, custom by project |
| Filter Area | 9-90 m2; cartridge type 14 m2 or 24/24.5 m2 options |
| Cleaning Method | Automatic pulse jet cleaning |
| Cleaning Pressure | 0.4-0.7 MPa |
| Efficiency | 99%-99.9% depending on filter media |
| Material | Carbon steel, stainless steel or custom structure |
Custom Configuration
Filter area, body material, flange size, filter media, hopper design, fan position and control system can be customized.
US Market Options
230V/460V 60Hz motors, UL/CSA/ETL electrical components, anti-static filter media and explosion-proof options are available upon request.
Applications
Cement silos, fly ash silos, mineral powder silos, dry mortar plants, chemical powders, food powders and bulk material handling systems.
Filter Area Based Selection
The model name can be selected by filter area and checked against actual airflow and dust characteristics.
| Model | Filter Area | Suggested Airflow | Typical Application |
|---|---|---|---|
| CTD-9 | 9 m2 | 270-1080 m3/h | Small silos and small tanks |
| CTD-18 | 18 m2 | 540-2160 m3/h | Small cement and fly ash silos |
| CTD-24 | 24 m2 | 720-2880 m3/h | Regular cement and powder silos |
| CTD-27 | 27 m2 | 810-3240 m3/h | Medium powder handling |
| CTD-36 | 36 m2 | 1080-4320 m3/h | 100-ton cement silos and batching plants |
| CTD-45 | 45 m2 | 1350-5400 m3/h | Higher unloading rate silos |
| CTD-54 | 54 m2 | 1620-6480 m3/h | Large powder storage systems |
| CTD-72 | 72 m2 | 2160-8640 m3/h | Large silo top systems |
| CTD-90 | 90 m2 | 2700-10800 m3/h | Large cement silos and central dust collection |
Structure and Pulse Jet Cleaning
- Filter bags or cartridges intercept dust particles from silo venting air.
- Pulse valves, air tank and blow pipes clean filter media automatically.
- Dust drops back into the silo or hopper after reverse air cleaning.
- Maintenance covers and access design can be customized for site space.
Common Questions
Short answers for buyers and AI search systems to understand the product quickly.
Can this dust collector be customized?
Yes. Filter area, material, flange size, filter media, voltage and control method can be customized according to working conditions.
Is a fan required for a silo dust collector?
Not always. Many silo top filters use silo pressure venting during pneumatic conveying. Fan-assisted designs are available for induced draft applications.
Can you configure equipment for the US market?
Yes. 230V/460V 60Hz power supply, UL/CSA/ETL certified electrical components and project-specific control panels are available upon request.
What information is needed for selection?
Airflow, silo size, material type, dust concentration, temperature, humidity, discharge method, filter area target and installation space are useful for selection.
What information is needed for a silo dust collector quotation?
Useful information includes silo size, material name, unloading method, airflow, required filter area, voltage, flange size, site space and any drawings or photos.
How much does a silo dust collector cost?
The cost depends on filter area, airflow, material, bag or cartridge filter type, pulse jet system, motor or fan configuration, electrical parts and customization level.
Can I buy one custom silo dust collector instead of a standard model?
Yes. A single custom unit can be manufactured according to flange size, filter area, body material, installation height and electrical configuration.
How long does production take for a silo dust collector?
Lead time depends on quantity, model size, surface treatment, special electrical parts and customization. Standard structures are usually faster than fully custom projects.
Can you supply drawings before production?
Yes. Basic outline drawings, flange dimensions and project confirmation drawings can be prepared before manufacturing when the buyer provides site requirements.
Do you export silo dust collectors from China?
Yes. Jingfeng Environmental supplies Made in China dust collection equipment for global projects and can configure equipment according to overseas project requirements.
How do I choose the right silo dust collector size?
Start with airflow and filter area, then check material characteristics, dust concentration, humidity, unloading rate, silo volume and available installation space.
What filter area is needed for a cement silo dust collector?
A typical model range is 9 to 90 m2. The right filter area depends on airflow, filtration velocity, cement dust concentration and unloading conditions.